The liquid glass (or wax) is an alkaline solution of sodium silicates or potassium. The normal state of these compounds is a liquid, but in the air they dry up and form on the surface of the film. To impart certain technological properties has introduced different add-ons.
Select the Polish depends, in the first place, between the color of the car. This is because dark and light colors refract light in different ways. Specific restrictions for the use of liquid glass is not. Sometimes it can be pressure on the workpiece, but is most often provided, the technology of washing. The duration of the preservation of the results of the use of liquid glass is dependent on the use of the recommended special shampoos.
Manufacturers of liquid glass for car ensure that it is due to the treatment, the body will continue for several years, but taking into account all of the recommendations. With the proper care for the body warranty is 2 years. However, it would be right to think not the time of the occurrence of the loss of the Glow color, and the number of washes, such as the use of standard detergents leads to the destruction of the coating. Especially means a composition that contains abrasive additives.
Liquid glass is applied to the surface of the body, to maintain the paintwork in its original form or in order to hide defects occurred during operation.
The thickness of the layer exceeds 1.5-2 times the thickness of the second shade, which provides the result.
The car body is constantly exposed to various influences that lead to the destruction of paint and varnish coatings. So, to preserve the original finish, it is recommended that the treatment of the body immediately after the purchase of the car. And liquid glass for the car, not only on the body, but also for other parts of the glass or hood. Its use allows to obtain a layer, which serves as a reliable protection against the effects of corrosion and other factors, and will also help to eliminate the small defects and to maintain the shine of paint, coatings.
Treatment color of the car body liquid glass is an innovative technology that allows you to gain some of the benefits:
The use of liquid glass on the truck, despite the simple technology, requires strict implementation of all requirements of the manufacturer of the paint.
Before starting work, the surface must be thoroughly cleaned and dried. The temperature of the air in the room must be in the range of 10°-40°C, otherwise the desired effect will not be able to. The composition is prepared solely in accordance with the supplied instructions and used in small quantities on the surface. After the material is partially dried, it is ground using special equipment.
The drying time depends on the temperature at which the process is carried out. At temperatures above 25°C for the material to dry enough for 10 minutes. If the temperature is 10°-20°C, the duration of this process is increased for 20 minutes. At temperatures below 10°C in the case, to resign.