Often car washes in the fall and in the spring of motorists who have spent a lot of time and nerves. But out of this situation, there is an exit, because it is possible to wash a car is much less and at the same time will always be presentable. It is only required to handle all parts of the body, using liquid glass for cars. This shade is currently considered to be very popular and more and more motorists each year prefer this. This happens for a reason. Liquid glass has many advantages that attract motorists. However, in addition to the advantages which are with this tool and some disadvantages, which also does not hurt to know in advance.
To get started is to know what the liquid glass. This is a special tool designed for surface treatment of the car body. Nail Polish is also allowed to use wheels and glass. After processing the vehicle with liquid glass it is necessary to wait a certain drying time. The only way that they can get a lock on the treated base and will last much longer. As a result, parts of the body of the car formed an additional protective layer, which helps for a long time to maintain the nice appearance of color.
According to the above mentioned advantages and disadvantages, one conclusion — it is best to Polish the body of the car with liquid glass. Also if the vehicle will get under the rain, the liquid glass will not go away. It is also important that the tool, which is based on the surface for several months, but this fact characteristic only if they are properly applied to the surface of the body.
1. Be sure to check that all required is present in the kit for nail Polish. Usually with liquid glass supplied: dispenser, the tool itself and the hardener, a soft cloth, glove, sponge and towel. In this case, if some of the things of nail polishes, which are not included, we recommend that you buy. Depending on the result of the work performed.
2. Composition safely held on the body should be well washed the vehicle and dried. Special attention should be paid to hard to reach places. Usually in these areas accumulate a lot of dirt. At the end, you want to degrease the surface of the parts of the body. It is possible to use white spirit mixed with water. Not allowed in this case for the use of the funds, which contain a silicone or a worse mood.
In this case, if pre-CU was treated with other nail Polish it before applying the liquid glass will need to be sure to remove the. Otherwise, the coating can not give the proper protection for the car.
3. It is desirable to prepare the body for nail in ventilated and dry place. This will suit a garage or even a carport. It is important that the solar rays, dust, and dirt that falls on the surface.
4. After the preparatory phase can begin to Polish your car with liquid glass. You have to start with a small plot. Treatment of the body is gradually, in a circular motion. After using liquid glass at one detail, you may proceed to another. In some cases, the implementation of the repeated treatment.
After this it remains only to wait for the Polish to dry completely.