Polishing and application of liquid glass

After purchasing the car, I was very pleased with the condition of the colour. Wash to call is not wanted, not to see the matt surface with tiny scratches. When talking with friends, he told me about the technology behind the "liquid glass" and offered to try it out on my car. After reading information on the Internet, I agreed to provide his car for the test. The whole process took us two days.

The first polishing

The polishing process started with the removal of bituminous stains. Tried to remove with white spirit, but it was a very time consuming process and not very effective, because apparently since the release of the vehicle from the dealership, the body is never clean. Had to use 2000 sandpaper. Crude, but effective. Then 17. (3M) wax, and then 75. (3 m) and finish anti-hologram 83rd (3 m). The use of liquid glass took a bit of time in the first experiment, we used the liquid glass one company. The manufacturer promised the permanent protection and repellent effect for several years. It was discussed in the car, the Glow became deeper, the car wash was not in for two weeks, did everything in accordance with the instructions.


After a month of using the car a lot of difference in color in comparison with other black vehicles are not noticed, and dirt from sticking as well. When ventured to wash themselves in the river, which is very much regretted, scratches appeared Nemer, and then rinsed only contactless wash, the paintwork, no sponge, no cloth, not touch.


After a few months, a friend suggested the new glass another company from Japan, the manufacturer warned that the glass adds Shine, water-repellent effect and protection against minor scrapes, up to 1 year, I agreed. Sunday will be dedicated to this process. Polishing is a lot less time than the first time, at the same time experimented with innovations for cleaning and polishing body, in particular for cleaning uses special clay that removes dirt and tar stains, without injury to the color. Then walked 17 (3 m) Polish and experimented with anti-hologram and regretted it, as it is applied with the use of water, which leads to what on the body are divorces and joints become clogged, the water composition with a Polish to remove only with water, good pressure, car washing in the vicinity of was not, and to go in rainy weather on the sink, to return with sand on the body is impractical, so I had to wash by hand. Then the car body treated with a special compound for pre-treatment before applying the liquid glass. Completion of the mixed fluid that covers the car, waited 10 minutes, and polished with a special cloth microfiber. While the composition reacts with the paint coating, we at the same time coated glass anti-rain, is also of Japanese origin. This is basically all.