Car covers, liquid glass

Liquid glass for cars there is a value in the form of avtopoliroli, which began production in 2008 as more Japanese manufacturers of chemicals for the machines.

Today, the stores can meet a variety of coating called "liquid glass for cars". The use of such tools includes protective treatment of the vehicle body.

machines Foreign manufacturers to distinguish avtopolirol for cars with exterior dark color and light. Also, give a guarantee on the effectiveness of the use of the coating within a period of 2-3 years. However, in the national workshop to cover the auto nanoceramics you the maximum guarantee for one year, because of our climate and road surfaces.

What is the treatment of liquid glass car?

Almost every self-respecting motorist want, as long as it is possible to preserve the original freshness and brightness of color for the iron horse. However, in the process of operation, the LCP body has the ability to fade, there are "strips" on the enamel, minor chips. Here you and useful "glass protection".

This innovative tool, which can be covered as the car body and glass. The Original coating this tool will allow you to protect your car against aggressive environmental influences. Drops of rain will not leave stains, and while driving a car, you might not need to turn on the wipers.

Which is water-repellent effect. After application of the ceramic coating, the color of the car that becomes deeper and more intense, disappear minor scratches. Muddy puddles is now anyway, even if a little dirt remains, it can be easily washed off with a water bottle.

 

Today a lot of people who have had the experience of the newfangled medium known as liquid glass for cars. In the network appeared the first reviews, both positive and negative, if without them.

However, in practice, the use of this tool shows that the coating can be determined by the manufacturer number of car washes, but only if the original tools and the appropriate program for the car. Complete all requirements for the application and processing of liquid liquid glass car body will not be a waste of time and money.

Carry out the work with hands

How to use the protective coating for the car? Liquid glass can be applied with the hands, although it is a very time consuming process, but it justifies the time and effort. None of the polishes do not give such result, as Polish on the basis of liquid glass. The shine of your car will plunge into shock even the most ardent skeptics.

First you need to wash the car, that is, degrease and wipe dry. If the vehicle is previous Polish, then it should be removed with mechanical means (a certain number of washes or abrasive toothpaste).

Should not be used for the scouring of the low quality alcohol or degreaser silicone-based, and also means that leave a film. It is impossible to make our protective agent at the heated part of the body, this is best done in the cold condition.

The procedure for the use of the liquid glass takes 3-4 hours of your time. All the actions that must be performed in a warm and dry place to avoid direct sunlight and dust. Do not use at temperatures below +10°C and over +40°C, the most favorable temperature is considered to be + 20 degrees Celsius.

 

It is important not to try to RUB the whole car at once, you should do it in parts, piece by piece (bumper, fenders, etc). Otherwise the Polish on the basis of liquid glass can dry out, which would complicate the process of rubbing.

After the application of the cars should be left in peace for a few hours for polymerisation. You should also refrain from washing the car for the first 1-2 weeks, depending on the manufacturer, the polishing based on liquid glass.

Ceramic car polishing

This includes the polishing of the quartz-ceramic coating. Foreign manufacturers offer a warranty of five years. In our road conditions the warranty period is reduced to two years. The quality and durability of the protective coating at altitude, however, and the price is much higher than for other types of polishing.

In applying this coating forms a solid film in the form of a varnish, which is several times harder than a car. This creates a lens effect, when he says the color of the car slightly increased, but nevertheless visually noticeable but are getting errors in the color. For this purpose, prior to the use of a quartz ceramic coating, mechanical polishing of the body. Mechanical polishing to perform better angular mouth polituraa detritis grinding machine. polishing

A good camera must be equipped with an engine of 1300 w and a gearbox with a large gear ratio. Frequency of rotation of the tool must be in the range of 1000 — 3000 rpm, along with the machine provides for grinding pad with Velcro, on which is fastened a variety of pads. The quality of the device, you will see that the attachment plates is easy and convenient Velcro.

For polishing paint and varnish coatings used fur lining. This should be done at low engine speed Metalli perpoliendi machine and, without strong pressure on the tool, otherwise you can overheat or burn the coating.

16.08.2018