The latest trend among manufacturers of nail polishes liquid glass for cars. Material with the same name, which is known for about two centuries. This files most often aqueous alkaline solution of potassium or sodium. Has excellent adhesive properties and is waterproof, so it is often used in construction for waterproofing. However, for the protection of the car body uses a different chemical composition. This is the silicon dioxide, which may be made of synthetic glass.
The push for the use of these substances for the production of varnish put on Japan. That's where the first to use liquid glass as a protective coatings of a car. This happened in 2008 and gradually come to us. This protection is becoming more and more popular due to the fact that the resting on the surface of the vehicle is unusually long. The developers say, about two or three years, reliable operation, however, is the domestic automotive traders reduce these numbers to the year, citing the unusual weather conditions and the quality of roads, in which the molten glass wears out faster.
After two or three years of operation of the colour (colour) the car starts to require increased protection. It seems the chips, scratches, cracks, and scratches. In the end, it begins to lose the look. Are a variety of varnishes, which are usually made from wax, silicone, and various polymers. They return the vehicle the look, but this effect does not last long, so that the procedure must be repeated again and again. The use of liquids, glass, protective coating, that eliminates this problem. New technology has drastically changed the options of car care – now their body can be protected for a long time. A lot of people are asking where to get this miracle tool and can be used with your hands or you have to visit the service center.
Japan is the undisputed leader in the field of protection of the body against the effects of the environment. Generally serve as a benchmark for the branding of other manufacturers. Japan has managed to create an excellent care of the car, one of a kind in contemporary practice are not available. Liquid glass used for the body of the car, which has the following properties:
There are no restrictions to the use of this coating on a car body with his hands, does not exist, you can verify this by looking at the video.
A set of shades includes everything you need. Any special tools for the application of the coating to the body with their own hands is not necessary.
As part of the setting, that you can buy, and if not, that would be included:
It is important that the set comes with instructions in Russian. But, as the saying goes – better to see once not heard a hundred times, so watch the video on how the coating is applied to the body in fact does not bother him.
Before treatment, the vehicle should be properly prepared as follows:
If it is covered with a varnish, which should be removed. For the preparation of the body of the poor quality alcohols or compounds containing silicone.
It is very important that between the color and used liquid glass was not of the intermediate layer, that may impair adhesion.
The temperature in the implementation of the part must be between +10 °C to +40 °C. Therefore, if the work is carried out in the winter time, the garage must be heated. Do not apply liquid glass on a heated surface, so that the vehicle does not have long before this stand in the sun. In practice a full body treatment lasts 3 to 4 hours.
General rules when working with the liquid glass are as follows. Protection of the color of the body that is used in a room protected from sun, moisture and dust. Well washed, the garage for such purposes, is ok. Before his hands completely treat the entire surface of the body, it is better to choose a small area and try out the tool on it. Before the start of construction should take another look at the video to remember the sequence, milestones and methods of work.
After using the liquid glass on the exterior, the car should be left to dry for at least six hours in the full grip on the color. The process of final stabilization of the structure of the material is long enough, so that once a week, prohibited vehicles, washing, chemically active substances.
A very important point, when applying the protection of the body is an initiation into the work. If you carefully watch the videos, as they are made with your own hands, you will notice that each item is processed separately. This is due to the fact that the composition rapidly sets and a larger area LCP body you just don't have time to grind. If the material hardens, then remove it would be very difficult.
You need to take care that the products are produced in two versions: for light and dark cars, so it is better to buy or order a tool suitable colours.
According to the manufacturer Polish Wilson, Japan soak in the metropolis up to 50 visits to a car wash, which is certainly a remarkable result. Even if we make allowances for different weather conditions, and divide that number by two, the result will still be impressive.
Liquid glass for car is definitely the best to date tool for protecting the paint. And the head of this movement is Japan. The effect of the use of resources is especially evident if you look at the video, it looks like the body of the car before and after coating his hands. After the work is done, the car looks flawless, as if they came down on the treadmill. This is evident from the many testimonials from those who have the time to try this kind of polishes.
Now the body can not be afraid, that dirt, because the processing, it will become immune to it and it ceases to belong to the color. The result is a small amount of water in the bottle will be enough to fully put in order the appearance of the body after a long trip over dirt roads. Will also change the behavior of the car in the rain. With him almost completely disappear dirty stains in abundance, occurs due to the falling drops with the standard treatment of the body.
The cost of such assets for the protection of the vehicle body is substantially higher than standard Polish, but taking into account the duration of the operation and additional advantages may be acceptable. The tool does not require any additional tool, which allows you to save. However, keep in mind that the area of the body before use should be cleaned with special care. This means that you will need to consider the cost of these works, which require the purchase of additional materials. If we assume that Japan is a world leader in the manufacture of means of transport for deep cleaning, you will have to buy another clay. On the Internet there are reviews on the common use of these tools, pictures and videos and they are very optimistic.