Or RUB back into the car wax and how to do it correctly? Look at the motorists on this account is different, someone for and someone against. How to wax and what effect it provides.
For the treatment of the body you can use natural and vegetable waxes(for example Carnauba wax). The physical properties of natural and synthetic waxes are very similar. So wax their fat, like the texture with a melting point of from 40 to 90 degrees, do not dissolve in water, not reaction with acids and bases.
Wax, which has long been used for the treatment of the body, to make the elegant look of the car. But in addition, this wax protects the car against various external influences. When the machine surface is rubbed with the wax, is heated, melts and penetrates into all the cracks that are on the surface of the body. As a result of this process, the surface of the car is aligned. Area of the body becomes smooth, so the sun's rays are reflected, not scattered in this case and because of this, creating such an effect, is a mirror image effect.
In addition, that car lights up like new, the wax that protects the paintwork of the car. The wax forms on the reverse side of some of the hydrophobic film whose properties are to alienate the water. Because the wax does not react with bases and acids, it also protects the body from any chemicals and some natural substances, such as resin of coniferous trees. From the surface of the grated wax resin easier to rinse off and not leave even a trace. As well as other dirt will be easier to slip away in the washes, respectively, of the body is more protected from minor cracks, which may arise from the washing of cars.
For the treatment of the body uses three technologies:
The hot wax before using the first diluted in hot water, then applied to the body. This method helps to obtain a fairly thick layer of wax that protects the machine, not only a variety of contaminants, but also against corrosion. Disadvantage of this wax is rapidly consolidating, it can be easily lignum powder, the resulting machine may not as much Shine.
Cold wax is applied to the surface of the body by rubbing the surface of the paint. It is much easier to use and creates a mirror Shine and protects the surface from damage and microcracks. However, the degree of protection is much lower than that of hot wax.
Solid wax provides a longer lasting effect, it is enough to apply 3-4 times per year. The hard wax is much harder to apply on the surface of the car, but provides a better protective effect and a more attractive look.
How to handle the body of his beloved "the horse", which is chosen by the car owner themselves. All depends on what the objectives of the owner of the vehicle. In some instructions of the vehicle manufacturers specify that the wax processed body you need, the better these tips if you do not neglect.