Processing machine wax

They are ready to Polish the body every day. These people are willing to spend a lot of time waxing, using products that are used in several stages.

polishing wax

For other people who truly appreciate your time, but wants their car was neat and tidy, needed a quick and easy solution if you want to restore the Shine and protect the body. For these and other categories of people who are products that can give excellent results. Let's look at the process of preparation and use of wax.

Up to now, there are hundreds of products on a wax basis. They can be divided into the following categories:

  • Liquid waxes;
  • Waxes in paste form;
  • Wax sprays;
  • Sealants to protect the body.

You should start with cleaning the surface

Before the use of protective waxes the car body must be clean. Easy to wash will not be enough, on the surface remains dirt and adherent solid particles. For a more thorough cleaning after washing using universal cleaning, waxes, cleaning with the clay and other compounds. Let us look at the pros and cons of this method of cleaning.

Wax composition 2in1(cleaner and wax for protection) vs cleaning with a clay+wax

Most modern cars have a varnish coating, even if the color without metallic effect. This coating differs from the coating without the paint. Modern polishes, which is used in a thin layer. This is done in order to save and reduce the final price of the car. So, that is not correct, that the regular use of abrasives for cleaning and polishing bodywork. 2in1 wax compositions are the cleaners for wax-based. As cleaners that contain abrasive particles. The stock thickness of the varnish will not allow you to do a lot of polishing. It is recommended to use the detox clay and then use wax that contains no cleaners.

Polish to remove defects before waxing...

If the vehicle that You intend to cover with wax, there are minor scratches and scuffs, you must first use the polishing pads. Some people mistakenly think that waxing removes minor errors. Before applying wax you need to remove the smaller scratches, by following the dry water, disappearing. All of this can be overcome or smooth out the polishing. Wax just maintain a clean and renewed surface.

Use car wax with spray

Wax spray can be considered the easiest way to use the wax for protection. Now wax spray competes with the best liquid wax and the waxes in the form of a paste. The wax sprays used polymers, which give good protection.

The protective polymer coating applied by the spray can also be used in the sun. Of course, for best results, it is better to use them in the shadows.

polishing

Use wax spray, you must first thoroughly wash the car. Next, you need to prepare a special towel for polishing. You will need to use wax and immediately grind with him a towel. Processing, so the surface is better in small segments. After processing a full plate, you'll need to flip the towel and with a clean page, you will need to once again completely refinish the entire surface. In this way, You evenly covered with a protective composition.

The use of liquid wax and wax in paste form

In the past, wax in the form of a paste was most preferred because it gives good results. Today many manufacturers offer liquid and paste versions of the wax having the same composition. What is their difference? It all depends on the desires and the use of the method. Many people believe that paste waxes are better suited for manual processing, while liquid waxes are more suitable for use with a polishing machine.

No need to overdo it with the quantity of used wax. This also applies to paste and liquid wax. The smaller, the better. To get a uniform thin layer of wax. For a modern polymer waxes thick layer is not needed. A thin layer dries faster and easier to use.

In the application of liquids and pastes, waxes, follow these steps:

  • Treatment areas in the shade where no direct sunlight;
  • Use the special applicator recommended by the manufacturer, or is available in a kit with the wax. Generally suitable sponge;
  • Treatment of the body panel segments for 20 to 40 square centimeters. Some of the products before rubbing applied to the entire machine;
  • Need to clarify in the instructions for your product, I have to wait for the wax to dry before rubbing. Some products may require drying before powdering, and some are for grinding. the game immediately after application;
  • Always use a small amount of wax for rubbing. Using too much wax, You're just wasting it in vain. If you use a lot of wax and it rubs bad, try to change the direction of the clean side of the towel and repeat the rubbing.

After applying the wax surface must be smooth and shiny, without streaks and drips of wax.

What if after all this work You still to the left of the track and the area where wax is difficult to grind. There are several techniques. The easiest need to Park my car under the sun for 10-15 minutes. The wax will heat up, but it is impossible to become hot, but then again, you need to go in the shade or a garage. Next, clean the disc with a special towel for polishing, you can easily bleach the wax to a Shine.

A combination of waxes

methods for polishing

People who are preparing the cars for the show, often coated with wax on top of synthetic wax. The synthetic wax acts as a gloss layer while the wax adds depth and a wet effect. Before applying another layer of wax, you will need to give the first layer harden. This can take from 12 to 24 hours.

Transparent sealants to protect the paint

In addition to the classic transparent sealers waxes are there to protect the painted surface. They are composed of synthetic ingredients. Substance for paints provide a more durable protection than waxes. They are easy to use. The disadvantage is the shallow, surface Shine, give them. Some of the waxes with natural ingredients or with a combination of natural and synthetic ingredients, which give a deeper Shine.

Before using the sealant, you need to wash and dry the car body. Sealants to protect the paint hydrophobic, therefore, during application on the surface may not be exposed to water.

The main principle for the use of such sealants is that you need to apply a thin layer and leave for 20-30 minutes. Both synthetic sealants, which are applied directly on the entire surface. Can be used in a circular motion, evenly distributing the composition. There is no need to RUB the composition, as is done with the classic waxes.

Sealants may also be used for glass, chrome and plastic.

What are the benefits of machine wax and synthetic sealants?

  • Wax or synthetic sealant creates an invisible protective film, which helps protect the paint from various environmental influences: dirt, rain, insects, tree resins, bird droppings, etc. (the key sentence here is "protect", as no wax will not give 100% protection against aggressive environmental influences).
  • The modern definition of a wax and synthetic sealants to protect the paint and create protection from UV rays.
  • The wax fills in the small scratches and makes them invisible. It is clear that such an effect exists, but this applies only to very small scratches. Wax is not a solution for scratch. Larger scratches to be smoothed by polishing.
  • Wax and synthetic sealants to keep cleaned and polished paint surface, and also give an extra Shine to the painted surface. Synthetic sealants to protect the paint and body are the sharpest part of the long-term protection of the paint. If the paint is still aggressive, that is, in the partial load operation, the sealants, which can be stored in the protective coating for several months.
23.08.2018