HOW TO MAKE LIQUID GLASS FOR CAR

To see your car clean, sleek and radiant – a true desire of all motorist. Of course, at the time of purchase of the machine, but after a few years of active service the vehicle does not seem so great.

Is the deterioration due to adverse environmental factors, which adversely affect the color of the body. However, this process is not irreversible, so to save the situation is quite real. In order to return the body of the car is nice, shiny and coveted look can be used "liquid glass". In today's material we will consider its properties, advantages, disadvantages and application procedure.

<1_IMG>

LIQUID GLASS: THE ADVANTAGES AND DISADVANTAGES

Liquid glass for car is a form of polishing that is used for the vehicle body gives an attractive appearance and protects against harmful environmental factors. Used this cover for a machine quite often, as this allows a low cost, to restore their "as when you buy". In addition to the mentioned visual effect, a substance which has the following advantages:

  • protects the body against dirt, dust and ultraviolet radiation;
  • repels water mass;
  • not afraid of the road-agents;
  • it gives your body a uniform gloss;
  • it is easy to use.
  • However, this Polish has some disadvantages, namely:

  • requires careful preparation of the body for use;
  • it is not cheap;
  • challenging for the next machine wash.
  • In the basis of liquid glass is a compound of sodium and silicon, which after application to the body forms a thin coating, the structure resembles and partially represent the glass. Hence the name means.

    Important! Due to the unique structure of the wax type of "liquid glass" requires a careful ratio after application to the body of the car. The fact that the use of abrasive shampoos for washing machine, covered it with liquid glass, or wash with the brushes at the car wash may reduce the lifetime of 2 or even 3 times.

    WHERE TO GET LIQUID GLASS FOR CAR

    Many motorists are wondering where you can get a similar Polish and how it can be saved. Just note, that for the preparation of liquid glass car with their hands very hard. A person who has no knowledge of the chemistry of cooking the Polish and it is not true that it is due to the complex structure of this tool. But whether, in General, to try to create your own water glass?

    It should be noted that in the specialized station for the cost of covering the car with liquid glass are highly inflated. Some experts say that their method is more durable and coating technology, more innovative, but in fact the differences in the coverage of the TSA and the house is not so important. Summing up, we state: liquid glass for cars with their hands do not, except in a situation when you are a professional chemist and have in their Arsenal a lot of reagents, substances, however, buy a car and cover the car yourself, saving on services of experts, is quite real without the loss of quality in the execution of all work.

    THE COATING PROCESS

    If you want to you personally to pay for their transport to the Polish "liquid glass", you will first need to prepare the following tools:

  • directly to the liquid glass;
  • car shampoo;
  • degreaser;
  • sponge;
  • a microfiber cloth.
  • After the preparation of the necessary tools, you can begin the procedure for Polish on the body, which goes as follows:

    1.
  • First of all pick a room to upgrade your car. It is important that the place where the car applies for the liquid glass, there was high humidity and it was cold, dusty and Sunny. Otherwise, they can become an unpleasant consequence – the deterioration of the appearance of the car.
  • 2.
  • Then thoroughly wash the car, cleaning all areas of the body against dust, dirt and stains.
  • 3.
  • After washing allow it to dry and apply a on its surface degreaser (for example, the well-known white spirit diluted with water).
  • 4.
  • Using the instructions for the molten glass, in the form in which the medium is ready for use. Some varnishes require shakes and open, but others must be pre-cook, mix the liquids in certain proportions. Specifically in your case – act exclusively on the instructions of molten glass, not otherwise.
  • 5.
  • Now that the previous steps done, it remains only to apply the Polish. For this a small amount of Polish put on the cloth and start with a circular motion, a thin layer of the rubbing means on the body. In order to achieve the best effect is achieved if the step by step for erasing individual parts of the body: the first bumper, then the hood, then the roof and so on. In the second case can happen before the solidification of the substances in certain parts of the body, which cause uneven use.
  • Important! If earlier, until the liquid glass on the car was used in the other poland, which is to be erased using a special paste, as drawing one means to another desired effect will not be.

    It should be noted that pre-drying of the liquid glass comes in 3-6 hours after application to the body, and finally, after 14 days. When the first time you operate the vehicle, and after the second wash, but on the basis of the above rules. As a rule, the liquid glass can withstand approximately 15-30 properly organized sinks.

    In General the liquid glass on the car is not so difficult. The main thing – to know the features of this procedure are considered in detail above. I hope this material is useful to you. Good luck on the road!

    24.08.2018