Many owners of the car wax polishing tools exclusively for their own pet shone in the sun, and was looking better than new. However, this means the other side of the coin, which is more useful than just glitter.
In addition to the fact that after rubbing with wax of the car, looks a lot nicer and newer, its surface is designed in a specific thin film. This film acts as a shield against the harmful effects of the environment.
The first, which protects the paintwork of your vehicle from direct exposure to ultraviolet radiation. This helps you save a long time, the original color and shade of the painted surfaces. Simply put, the color does not fade, as in normal operating conditions. This is especially true when the car is quite a long time remains in open Parking areas, where there is no protection from the sun.
Secondly, the wax film is not only close to the access moisture in the color of the body, but also gets into the fine scratches and other damage. And this, in turn, limits the direct contact of water with the metal of the car, which itself is a lot of extending its lifetime, without the need for serious body work.
The next enemy is the colour of the car, the aim of which is the protection of the wax layer, the different insects, which are in surplus, as to stick on the surface of the body. The fact that many insects have substances, chemical composition, that is similar to acid or alkali. And their impact can not be useful for automotive paint. The same can be said for poultry manure. All this leaves an uncomfortable residue on the surface of the body unprotected.
Today it is on the market automotive supplies and accessories offers car owners a wide range of products for body care. This tools so much that customers do not have the time to deal with the composition and properties of the proposed products. Meanwhile, even such simple tools, like wax for the car, it also has many types and types.
The most common errors cause means, that only contains the wax particles, however, are a little for other purposes. We are talking about the tools that can be used for rough polishing body, which means partially rubbing in the color, along with shallow scratches, and other defects. These funds are intended for use once per year at most.
If you use this tool too often, it is possible to achieve the effect of dulling the body, and to RUB it all the way to the primer. It rarely happens, but it is not necessary to forget about it.
Another type of means for polishing with the content of the wax is polishing for a seasonal body care. This is their use limited to only once in three months. These assets are composed of special substances, which are the same as the previous one, which is partly to "eat" the paint, thereby aligning the. These tools also have the abrasive particles, which with frequent use will erase the impressive layer of colour and make the owner of the car in disappointment.
Finally, the last type of wax products for the care of the body, that is, liquid assets are not durable. Their use provides short-term protection of the body against external influences, which is limited to two or three washes a car. Often this funding is used at professional car washes that would effect the Glow and novelty. Such tools are washed away very quickly, but their frequent use does not harm the color of the car.
If for any reason the driver does not attend for professional cleaning, you can that is able to control the body wax on your own. You need a quality tool for polishing and some simple equipment. Because the polishing is carried out with liquid wax is a long-acting, should be considered in more detail.
Before using any medication, be sure to carefully read the instructions on the packaging. Try to avoid funds that do not have explanations, in understandable language. Before polishing it is necessary to thoroughly wash the car with running water, always with the use of special detergents. Detergents will allow you to drop a small scratch the colors from the hardened dirt particles.
After washing, binding is thoroughly drying the car. To accelerate drying do not put the car under direct sunlight. It will be sufficient to treat the surface with a special cloth microfiber. It is effectively absorbed by the particles of moisture, which will allow you to immediately move to the polishing phase.
Polish the car with wax should gradually. That is the entire body should be divided into several individual components and subsequently processed. For example, you can handle the roof, then hood, then one of the doors, and so on.
To get the best effect from the application of a wax Polish, should create the most favorable conditions. This must contain the location of the car in the shade, so that does not get direct sunlight. The ideal is, if it is in contact with the body of the car feels kind of cool. These factors, which will ensure better absorption of wax and the formation of an effective protective film.
For the application of wax on the surface of the body, it is best to use a soft sponge. This can easily be bought at a specialty automotive shop. Often these washcloths are included in the material for polishing.
Some drivers practice extra protection for the Windows and headlights of the car. This is due to the fact that when getting wax on the glass caused the divorce, which negatively affects their transparency. Glass can't protect, but after using the polishing machines should be thoroughly cleaned with special means. If you want to protect the glass in advance, and then it uses a special film that can be attached and also easily removed.
Wax is used in small amounts on the sponge and on one part of the body, and then methodically pounded. After applying the wax give you a few minutes to "rest". Then with a dry cloth or towel to apply the wax in circular motions to create a glossy shiny surface. If the car is Polish is not too shabby, by the correct use of wax can be seen on the back of his reflection.
Car polishing other similar funds, referred to above, is the same. If you want to check the efficiency of the wax, you can use plain water. If the water is on the surface of the body collects in large droplets and rolls off easily, the wax is still working. If the droplets are small, or the water is completely dissolved in the thin film, and then polishing, waxing can be repeated.