Machine, and every thing that requires care and the proper wax for the body with your hands clean. However, even very experienced drivers do not always pay enough attention to the condition of the body. During use, the paint coating the body of the microcracks and chips, which may not be noticeable, and if we leave this fact without attention, the consequences can be very serious. Under the influence of an external environment – rain, sunlight, road dirt and impurities with the harmful chemicals, micro-cracks will increase and may cause corrosion. In order to avoid such situation and protect the body colour uses a different lake, but can also make efficient use of liquid wax for cars.
Liquid wax is more types of
A protective coat of liquid wax repels dirt and moisture, so that the machine stays clean a lot longer.
Liquid wax for cars is a special fluid for protecting the paint of the car, based on synthetic or natural ingredients.
With regard to the processing part of the car body, and the components, to fill cracks, small scratches, chips and other subtle defects in the coating and prevents the penetration of particles of dirt and dust. Also, the wax forms a sort of protective film that covers the entire body and repelling from road dirt and moisture, thus preventing the formation of premature corrosion.
Wax treatment is used to give a shine in the color of the body. After this process, applying the paint will look brighter, and it will get the Shine.
A protective layer that repels dirt and moisture, so that the machine stays clean a lot longer. In addition, cars are much faster to dry after washing.
The treatment of auto liquid wax can be done independently at home or professionals.
It has the similar properties of liquid glass – the modern protective agent on the basis of ceramics. Coating liquid glass gives a more pronounced and long-term effect, but that such a procedure can only professionals, and it costs many times more expensive. But, to choose what is the best liquid glass or wax You only.
Before we deal with how to apply liquid wax, you must determine what are its varieties and how they differ.
Today on the market you can find 3 types of wax from different manufacturers:
Regardless of the type of protective fluid is of great importance for the quality of the product itself.
Polishing a car with his own hands the operation is not difficult, but before we deal with the technology using liquid wax, you will need to undertake more preparatory work. First and foremost you need to very carefully wash the car. Hand washing in this case is not suitable, so it is better to use special equipment or to go to a car wash.
Then you need to give the car a very little bit to dry, but keep in mind the fact that the wax well, that only on wet surface.
The body of sicca, need to dissolve in water wax, strict compliance with the requirements of the user. And prepare a cloth or sponge, that you intend to use the primer.
Now you can continue with the use of liquid wax for cars on the body. Hot and cold varieties are used in the same way, the only difference is in the mode of cultivation of a whole. The use of protective composition should be a small area, leaving rough areas and gaps. If you want to start treatment must be from the roof, moving slowly to the lower parts of the body. After the wax protective layer, which covers the entire body, you'll need to make it a little "soak", that is, not to touch the car 15 – 20 minutes. After waiting a certain time, you can start polishing with a soft, dry cloth to treat the whole body area in a circular motion.
To get the desired effect you need to consider two necessary conditions:
If for any reason you do not want to use ready-made products, you can make wax by yourself at home on the stove. Note, however, that no matter how you try, homework will be less effective.
The Internet is replete with articles and video tutorials on how to make liquid wax yourself. The most simple and accessible way, in the manufacture of a domestic product on the basis of coconut oil. To make the wax composition of the method provided, You will need:
In the initial stage, it is necessary to send flakes of Candelilla wax on a steam bath to melt. When the fluid becomes homogeneous, while stirring, pour the required amount of coconut oil. When you add the coconut oil, the solution must be constantly mixed until it becomes homogeneous. Once the liquid reaches a uniform consistency, it is necessary to remove and give the ad prestiti. Adhæsit wax can be used.
After a few hours the liquid will harden in this form it is very conveniently stored, and before use simply to warm up.
What home wax for polishing difficult and time-consuming process that does not give a perfect result. Yes, and to cook a decent product you need to get your hand in.