Sooner or later, the painted coating on the car body becomes cloudy and is caused to leak, some time later, becoming very noticeable and spoils the exterior of the car. If nothing is done, moisture, dirt and sunlight will contribute to the enlargement of the cracks in the paint. Motorists, try with the formed microcracks to fight against the Polish. However, is the effect that it gives is temporary. In order to eliminate them completely on the paint coating and to prevent the spread of microscopic cracks, chips and scratches, you need to treat the surface with the liquid wax.
Wax on the painted coating forms a reliable protective film. The result is:
This can be the following types:
Synthetic wax. This coating is the most durable and reliable protection. This is often not possible to apply enough once in 5-6 months. The composition of the wax covers of tracks from shampoos.
Depending on what type of wax is used and the technological process of its application:
With wax, firmly grabbed the colour and protect the body floor, body first, it is necessary to wash well and go with the hot air.
Then think about how to work with molten wax. It should be diluted in a certain ratio with warm water. However, it is important that the temperature of the wax and the car does not exceed 20 degrees.
Apply the wax evenly. His surplus in a few minutes, rinse. If you want to run the application, it must, with the roof gradually lowering down.
Then you must remove the moisture from the car and wax composition in a circular motion to grind the entire surface with something soft. The process of application will take around half an hour.
Then consider why it is necessary for the waxing and what are the main advantages of application:
Over time the colour of the car fade, appear cracks, which will eventually become very noticeable and spoil the appearance of the car. If you leave all as is, water, dirt, will not contribute to the growth of cracks in the varnish. Drivers often struggle with microcracks using the nail. But it gives a temporary visual effect. If you want to completely remove the defects on the surface of the body and stop the growth of microcracks, scratches, small chips, you can use the liquid wax for cars.
Why car cover with wax? Coating machine wax contributes to the formation of the protective film to the paint surface. As a result, you will get:
Consultants of the Department of chemistry, can offer you different types of wax:
Wax for the car body, which is divided into species, depending on the application:
If you still plagued by doubts, what is the wax for the car is better, then no harm will know that the origin of the wax is different. In this connection, the wax is divided into types:
How to apply wax on the car? For wax well "sitting" on the nail and perform its protective function, you must first wash the car in a contactless manner, a little blow on it with air (but not until completely dry).
Let us consider the question of how to use the wax for car. Liquid wax is diluted in warm water (water temperature listed on the package the liquid wax), which in a certain proportion (it is stated in the instructions for use). Don't forget that the difference in temperatures between the dissolved wax and the body of the car must not be more than 20 degrees.
How to apply liquid wax for cars? The wax is applied evenly to a small area of the car and left for 1-2 minutes. The excess wax washed with water. Waxing should start with the roof of the car and gradually go lower.
Now the machine is poured with air (to remove excess moisture). Then the wax is rubbed in a circular motion over the area with a soft sponge, cloth or soft cloth (a kind of polishing by hand). The entire process of coating of car wax can take 20-30 minutes. Waxing the car with your hands makes no problems (except for the use of the foam composition).
To address the issue of why we have wax and what benefits you can get from its use: