Liquid glass for cars, special features, advantages and disadvantages

The open well maintained car always looks expensive and prestigious, regardless of its real value. As the end of the means typically used in the compositions wax, but today there are easier to use and more high quality tool for polishing cars, which is called liquid glass. About this later in the article.

liquid glass for car

Liquid glass for car

Liquid glass is recently enjoying great popularity among motorists. After processing this part of your vehicle will sparkle like a gem. In addition, liquid glass is the ability to remove minor defects, scratches and cracks on the surface of the body. This product protects the car from further damage, rust and UV exposure.

This cover looks very bad, but this vulnerability is only an illusion. In fact, a protective film, which is very solid. In the product glass is not included, and its main active element, silicon dioxide. This component on the molecular level, working with the paint coating. At the end, on the surface of the car body occurs the film mirror effect, which is a relatively high strength. In addition, it is durable and can serve its owner for more than one year.

Varieties of liquid glass

Today, there are three versions of liquid glass.

It is through these funds is from liquid glass, which is used as a varnish for the car:

  • Sodium, which is based on sodium, is an excellent fire resistant properties.
  • Potassic – designed on the basis of potassium, is characterized by a tendency to high hygroscopicity and its porosity.
  • Lithium – at the moment, is a rare liquid glass, available in small quantities, is used as a thermostat for the cover.

All three types of liquid glass can be combined into the single category of multi-alkaline compositions. In addition, they are integrated and combined. Sales of liquid glass can. For example, in the form of the container with the liquid, which should be applied to the surface of the car and wait for the drying – means, kristallizuetsya and creates a glossy finish.

There are lacquers and pastes, which are also applied on the degreased surface of the body with the help of machinery and kristallizuetsya. The active substances, liquids, glass and react with the body , which is this mirror effect.

The advantages of liquid glass

the advantages of liquid glass
  • Reliably protect the car surface from external factors, including chemical.
  • Provide mirror Shine and rich color.
  • Affordable price in comparison with other tools for polishing.
  • Durability – lasts 8-12 months without any loss of aesthetic properties.
  • Protection against the occurrence of fine cracks and scratches after a car wash.
  • You can easily upgrade, if the coating will fade.
  • Heat resistance – the coating when heated will not deteriorate.
  • Highly stain resistant and water-repellent properties.
  • UV protection liquid glass, which protects the Polish from fading.
  • Antistatic effect, which prevents the accumulation of static electricity on the surface of the car, in the winter time.
  • The transparency of the coating, thereby providing gloss and depth of paint finish.
  • Hardness – when creating means uses a special resin, which provides the data of hardness close to the glass data.

Disadvantages of liquid glass

  1. Need every 8-12 months to apply the new layer.
  2. Liquid glass kristallizuetsya very quickly, so that all actions on the application must have a professional.
  3. The work of the application is very demanding and requires tremendous patience.
  4. In terms of collision with an obstacle, there is a danger that the coating will just crack.
  5. Given our harsh winters, there is a possibility of cracking of the layers.

Characteristics of the use of liquid glass

  • Car wash chemical detergent significantly reduces the durability of the liquid, the glass, so it is advisable to wash the car with plain water, without cloths and brushes.
  • When covering the vehicle with liquid glass, a precondition for this is compliance with the use of technology. If the technology is broken, to ensure that the result is very difficult.

The handling of the car with liquid glass

Used liquid glass on the car, you need in several phases.

Check the packaging for nail

The kit must contain tools: basic composition and a hardener, pipette (required for mixing), protective gloves, a soft sponge, towels and specific fibre for hand polishing. If anything is missing, it is advisable to buy.

the use of liquids, glass

Select the job

Not recommended for the treatment of liquids, glass, if the car has been a long time in the sun and warmed up significantly – it is important that the metal was cold. Experts advise to carry out all work in a warm and dry place, avoiding sunlight and dust. The room temperature should be 15-30 degrees.

Prepare the surface of the car

In this stage, you should thoroughly wash the vehicle to remove all contamination. Then degrease the surface and put on the car to dry. Scouring is carried out using diluted in water white spirit. Prohibited to use poor quality alcohols or silicone degreasers, it is also an unacceptable use of resources, which will result in the film. If the body was already covered with all polishes, is to be removed. Otherwise, a new coat, it will take much less than the scheduled time and will not remain on the surface.

The implementation of the work

After the completion of preparatory work, start polishing the car with liquid glass. Do not use the makeup on the whole surface of the body – it is recommended that you practice on a small area of the car. If the nail Polish is providing the expected results and usually adjacent to the surface, unable to get to work.

Used liquid glass should gradually polishing each section. For example, you can start handling the bumper or right-wing. When the polishing of one element is completed, to proceed to the next level. This approach has its advantages. For the first time, used the medium will not dry up. Second, get higher quality to do the job.

After using a small amount of the composition on the surface, it is necessary rub it with a soft cloth, which should be included in the package. In the process of the procedure, make sure that the surface of the car is not exposed to dust or dirt. When you tractare whole body, leave the car alone for 4-6 hours. In this case, the molten glass is finally grasped, in two weeks. The best in this period does not wash your car (especially the sink).

opinions on liquid glass

Opinions on liquid glass

The effect after using liquid glass, is stunning. The body of the car shines as if just out of the salon. The color was rich and bright. Drops themselves roll off the car, and it looks great. Compared with conventional wax expolit, liquid glass is much better.

In addition, it eliminates fine scratches, protects the body from rust, fading and water repellent properties. Machine polished with liquid glass, much easier to clean, it does not stick to the mud and film, which protects the car body from damage.

16.10.2018