Relatively recently, the market appeared to be new, from the Japanese developers – the liquid glass. Of advanced motorists, who are able to evaluate the product and the experience of the "wow-effect" on my car. Now let us examine what is the unit of glass for the car, what are the advantages and disadvantages of the resources, how to apply liquid glass, and then click remove.
The liquid glass to a car they used as a varnish. With regard to the processing of your body, or just automatically creates a transparent film that helps to protect the car from minor damage, it adds Shine and new. Have you noticed how the owners of the cars paint after polishing, it becomes brighter. In addition to this, it has the effect to restore the colour and hide the small defects, the liquid glass repels water, and air.
The liquid glass is of several types:
The last is the most rare, it is used as a thermostat. Most often, it is used for polishing, kalium, because of them, on the basis of potassium also have a better water-repellent properties.
The advantage of the use of the liquid glass Polish for more than a conventional lie within the comparative durability of water repellency, maintains the original color and hide small defects. By way of comparison, the wax Polish shall be kept in the vehicle for up to 1 car wash, of the polymer to 4 to 5, the abrasive is used in a few cases (for example, to remove the glass). The glass will be left in the car for up to 30 washes.
Nanoceramics, and the smooth glass – primary competitors on the market of automobile service. Nanoceramics materials is expensive, but at the same time more durable. If the liquid is the glass in your home, climate it takes up to 8 months (for a maximum of one year), manufacturers, nanoceramics promising result for up to 3 years of age. With a choice of regular Polish, pottery, and glass, to give the preference to the last. The liquid glass is sure to the middle between expensive products and the typical applications. Whatever You decide, the choice is up to you.
In spite of all the advantages of the process, there are a couple of drawbacks. Among them are:
So, you have to weigh up the pros and cons of liquid glass on the car. Again, it should be noted, however, the coating of the washing liquid glass is a difficult process. In the case of minor defects, the result may be disastrous. If You are sure that you possess sufficient know-how for self-treatment of auto – forward!
The area for processing, it must be kept clean. No drafts, and high humidity. The ideal temperature of 10-40 degrees. A breath of fresh air of the processing machine, unfortunately, is not going to work. In the winter the cold and the direct sun's ultra-violet radiation in the summer, it may have a negative impact on the result.
Before you start the treatment of auto liquid glass, which is required for the purchase of the following materials:
Tip: most stores the liquid glass is sold with some of these items. Its better not to skimp and get a tool that contains the necessary components for the industry.
Prior to the use of the structure of the car, you can save your car from all the dirt. If you have old Polish remove it. Then, dry it, and then remove the grease from the car.
Prior to polishing, it is recommended to see a video on how to use the liquid glass on the car. Clearly, the process will be clearer, and some of the points, at any time, to re-read the instructions at the bottom.
Look for the nail Polish to the manual in the Russian language. If there is one show that you read and understand the instructions before each task. Also, keep in mind that it will be a full polishing of the car is +/- 5 hours at a time. All of this is because of each and every detail of the body is treated separately, and the multiple layers of the.
So, how to cover the auto with the liquid in a glass
Repeat this process with each part of the machine. After all the manipulations you leave the car for 5-6 hours for it to dry. After the successful Polish does not wash the car within 1-2 weeks.
The motorist of the issues, such as a laundry composition, of a vehicle, in the event of defects, polishing. If the procedure was successful and without errors, it is necessary to remove the liquid glass, it is not.
On the site of one of the manufacturers of a liquid glass, please write to:
"The running of the glass can be removed with any Polish with a fine abrasive."
This is to remove the current glass from the car, it is good enough that it works. How to write a device driver, this method is not an option. In grinding it is not possible to remove a part of the deep scratches. Plus, the bear quickly, and it needs a lot of water in the process.
In the event of a failure of the processing of the machine with the liquid in the glass, and then remove it from the vehicle it will succeed only in part. So, again, I think that about whether or not the risk is with the money saved?